![]() ![]() Works out of the box, both scanner and printer are detected correctly. Printing works out of the box since at least 6.06 (Dapper) but scanning before 7.10? needs details from lsusb added to /etc/sane.d/nf. Ink levels are not reported in Properties, and I could not find a GUI utility in the official repos that works with the C120. One caveat: Built-in ink/toner levels are not reported or not working (System > Administration > Printing > Printer's properties > Ink/Toner levels) use inkblot instead See Ubuntu Forums thread (slightly different than directions for previous versions of Ubuntu)Īuto-detect and install, works out of box. configure sudo make install -> sudo aa-complain cupsd -> install the printer via gnome system-config-printer tool ( Laser CX11NF Sudo apt-get install build-essential libcupsys2-dev ia32-libs -> download the driver from Avasys website -> unpack the archive into a directory -> cd into previous directory -> sudo. Printing from the terminal is fast, efficient, and easily scripted or done as a batch job.See question #48722 to make printer working ( Laser CX11NF Sending a job to a printer is an easy process, as long as you understand the devices attached to your system and how to identify them. On a different system, I have an HP LaserJet attached by a USB cable, so the DeviceURI is DeviceURI hp:/usb/HP_LaserJet_P2015_Series?serial=00CNCJM26429. In this example, the DeviceURI is lpd://192.168.4.8 because I'm using the lpd (line printer daemon) protocol to send data to a networked printer. ![]() The DeviceURI attribute identifies where the printer is found on the network (or physical location, such as the USB port). In this example, that's Ricoh Aficio 1060 - CUPS+Gutenprint v5.2.11. The MakeModel is the last half of the result. This command lists the relevant drivers you have installed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |